Hear from Our Customers
Your patio furniture is fading. Your AC bill keeps climbing. And by 2 PM, that beautiful outdoor space you paid for becomes completely unusable.
Exterior roller shades block the heat before it ever reaches your windows or living areas. You’re not just adding shade—you’re cutting cooling costs by up to 30% and dropping the temperature on your patio by 15-20 degrees. That means you can actually use the space you built.
The difference between interior and exterior shades matters more than most people realize. When sun hits your windows, interior blinds trap heat inside like a greenhouse. Exterior shades stop it outside, where it belongs. Your AC doesn’t have to fight as hard, your furniture doesn’t bleach out in three seasons, and you’re not squinting through glare during dinner.
This isn’t about decoration. It’s about making your home livable during a Texas summer.
We handle exterior roller shade installations across Dalworthington Gardens and the surrounding areas. We’re not a franchise or a referral service—we’re the team that shows up, takes the measurements, and does the work.
Dalworthington Gardens homes have character. Covered patios, large windows, unique rooflines. That means custom measurements and mounting solutions, not standard sizes forced into place. We account for wind exposure, sun angles, and how your home is actually built before we ever drill a hole.
You’ll work with people who understand what 105-degree summers do to outdoor materials. We use commercial-grade hardware and solution-dyed fabrics that hold up under the conditions you’re actually dealing with here. And when we’re done, we test everything, clean up completely, and make sure it operates the way it should.
First, we come out to measure. Not just the opening, but the structure itself—what we’re mounting to, how much wind exposure you get, where the sun hits hardest. This determines fabric selection, mounting method, and whether motorization makes sense for your setup.
Once we’ve got accurate measurements, your shades are custom-manufactured to fit your exact specifications. No trimming standard sizes or leaving gaps. When they arrive, we schedule installation at a time that works for you.
Installation typically takes a few hours depending on how many shades you’re adding. We mount the hardware, hang the shades, and test the operation multiple times. If you’re going motorized, we program everything and show you how it works. Then we clean up and haul away all packaging and materials.
You’re left with outdoor roller shades that fit correctly, operate smoothly, and actually block the heat you’re trying to eliminate. If something doesn’t work right, we fix it before we leave.
Ready to get started?
You’re getting shades built specifically for your openings using materials designed for Texas weather. The fabric blocks up to 90% of UV rays and significantly reduces solar heat gain. You can choose from different openness factors—tighter weaves for more privacy and blackout, or more open weaves that still let you see outside while blocking heat and glare.
Motorization is available and worth considering if you have large shades or multiple units. You can control them from inside without walking out into the heat, and they integrate with most smart home systems if that matters to you. Manual operation works fine too—it’s a personal preference based on how you’ll actually use them.
In Dalworthington Gardens, most homeowners add exterior roller shades to west-facing patios and south-facing windows where afternoon sun creates the biggest problems. These are the areas where your AC works hardest and where outdoor spaces become unusable without serious shade. The ROI shows up in your energy bill within the first summer, and you’ll immediately notice the difference in comfort.
The installation includes all mounting hardware, professional measurement, custom manufacturing, complete installation, operation testing, and cleanup. You’re not patching drywall or figuring out how to dispose of packaging materials.
Exterior roller shades typically reduce cooling costs by 25-30% for the areas they cover. The exact savings depend on your home’s insulation, window size, sun exposure, and how low you keep your thermostat.
Here’s why the savings are real: when sun hits your windows, interior blinds trap that heat inside your home. Your AC then has to work constantly to remove it. Exterior shades block up to 80% of solar heat before it ever reaches the glass. Your AC isn’t fighting a losing battle anymore.
On west-facing windows in Dalworthington Gardens, the difference is dramatic. Those rooms stay noticeably cooler, your AC cycles less frequently, and you’re not cranking the thermostat down to compensate for afternoon heat. Most homeowners see the investment pay for itself within 3-5 years just from energy savings, not counting the comfort improvement or furniture protection.
Quality exterior roller shades with proper installation handle normal Texas weather without issues. That means typical summer storms, high winds, and the occasional severe weather that rolls through Tarrant County.
The key is proper mounting and commercial-grade components. We mount to solid structure—not just trim or siding—and use hardware rated for wind resistance. The shades themselves retract into protective housings when not in use, which keeps them out of the weather most of the time.
During severe weather warnings, you’ll want to retract the shades fully. They’re designed for sun and heat control, not hurricane-force winds. But for everyday conditions including the gusty afternoons common here, they stay in place and keep working. We’ve installed hundreds of exterior shades across the area, and proper installation makes all the difference in longevity.
Blackout roller shades use a tighter fabric weave that blocks nearly all light and provides maximum heat rejection. Regular outdoor shades use a more open weave that blocks heat and UV while still allowing some visibility and light through.
For covered patios where you want to eliminate glare and drop the temperature significantly, blackout or near-blackout fabrics make sense. You get maximum cooling and can actually see your TV or phone screen without squinting. For windows where you still want natural light but need heat control, a more open weave works better.
The openness factor is listed as a percentage—1% is nearly blackout, 10% lets more light through. In Dalworthington Gardens, most homeowners choose 3-5% openness for patios and 5-10% for windows. It’s a balance between visibility, light, and heat control based on how you use the space. We can show you samples so you see exactly what you’re getting before manufacturing.
Installation typically takes 2-4 hours depending on the number of shades and whether you’re adding motorization. A single patio shade might take 90 minutes. Multiple windows with motorized controls could take half a day.
The process involves mounting the brackets securely to your home’s structure, hanging the shade assembly, adjusting the tension and alignment, and testing operation multiple times. For motorized shades, we also handle the wiring, program the controls, and show you how everything works.
We’re not rushing through it. Proper installation means the shades operate smoothly, don’t bind or stick, and stay level when extended. We also make sure the mounting is secure enough to handle wind and repeated use over years. When we’re done, we test everything thoroughly and clean up completely—you shouldn’t have to touch a broom or deal with packaging materials.
Exterior roller shades need minimal maintenance—occasional cleaning and a quick visual check a couple times a year. The fabrics we use are solution-dyed, which means the color goes all the way through the material and won’t fade or bleach out like cheaper alternatives.
For cleaning, you’re usually just hosing them down or wiping with mild soap and water when they get dusty. North Texas doesn’t have the pollen issues that some areas deal with, but you’ll still get dust buildup over time. A quick rinse every few months keeps them looking good.
The mechanical components are enclosed and protected from weather. If you have motorized shades, the motors are rated for outdoor use and don’t require maintenance. The main thing is retracting them during severe weather and not forcing the operation if something seems stuck. Most issues we see come from improper installation or trying to extend shades in high winds—both avoidable with proper setup and common sense use.
Yes. Exterior roller shades come in dozens of fabric colors and textures, plus multiple housing and hardware finishes. You’re not stuck with builder beige or basic white.
The fabric selection includes neutrals that blend with most home exteriors, but also bolder colors if you want the shades to stand out as a design element. The housing that holds the rolled shade can be powder-coated to match your trim, fascia, or even your roof color. Hardware finishes include standard white, bronze, black, and custom colors.
In Dalworthington Gardens, where homes have distinct architectural character, matching the existing style matters. We bring samples so you can see the actual colors and textures against your home before ordering. The goal is shades that look intentional and professional, not like an afterthought. Custom manufacturing means you get exactly what works for your home, not whatever was in stock.
Local Resources
